Basic Mending: Sewing on Flat Buttons from Tide.com

Become a Tide.com member and make this space all about you!

Do you have clothes that you haven't been able to wear because of missing buttons? Well, take charge and learn to sew on those buttons. This article is a great refresher for those of you who have forgotten or don't know how to hand sew buttons. Or pass along these basics to a relative or friend.

What You'll Need

Instructions

Follow these steps to sew on flat buttons of any size. A flat (or sew-thru) button has two to four holes through which you sew it on the garment.

Thread needle & prepare garment

	1.		Pull off 18- to 24-inches of thread and thread your needle. Pull one end of the thread to meet the other so you have a double thread. Knot the ends of the thread.

	2.		Locate the area on the garment where you want the button to go.

	3.		Place the needle into the fabric, starting at the wrong (or back) side of the garment, and bring it up through the garment.

	4.		Make two short stitches away from the knot (without the button) to anchor your thread.

Attach button

	1.		Place the button over the anchor stitches and bring the needle up through the button.

	2.		Lay the straight pin over the button.

	3.		Bring your needle down through the other button hole and fabric, over the straight pin.

	4.		Make 3 or 4 more stitches, through the fabric and button. Repeat steps for the other two holes if you are using a 4-hole button.

Reinforce button position & fasten

	1.		Bring the needle and thread out between button and fabric. (Do not go through the button.)

	2.		Remove the pin and lift the button to pull the threads tight against the button. This creates a shank of threads that appears beneath the button.

	3.		Wind the thread around the thread shank three times.

	4.		Insert the needle to the wrong side of the garment, where your original thread knot is. Knot and cut the thread.

Tips

			Pull each stitch taut to create a smooth effect and prevent a knotted mess.

			Use a thread color that is a close match to the other buttons on the garment.

			To get professional results, don't "over" sew.

			Instead of using a straight pin when creating the shank, use a bobby pin, matchstick or toothpick — something that is the same thickness as the garment. The shank allows the buttonhole to fit smoothly under the button.

			Pull thread through a sheet of Bounce® before threading needle if static is a problem.

			As you are sewing, inspect the garment for old stains. If you find them, pretreat with Liquid Tide®. Of course, check the garment label first to make sure items are not dry clean only.

Tide® Liquid

To Iron or Not to Iron

Up and Out the Door with Tide

Read what others have

to say and add your voice!

Please sign-in to rate this article.

Rated: 1 times

	© Copyright 2009 Procter & Gamble. All Rights Reserved. All copy and claims valid in Canada. Press/News \| Privacy Statement \| Terms and Conditions \| Tide on PG.com Newsletter Unsubscribe \| Site Index \| Contact Tide
	US English Canadian English / Fran�ais - Canada